SEASONITE : New wood stabilizer

SEASONITE® protects new wood from the damaging effects of the sun and moisture during the first season it is exposed to atmospheric agents. Breathable, it allows excess water to regulate while preventing moisture from penetrating the wood. SEASONITE® is a transitional protection before final treatment.

It stabilizes and protects the wood during its first months of exposure to the elements. It regulates the evaporation of moisture from the wood, reducing the risks of cracking, splitting, or warping due to sudden exposure to sunlight or rain. It also limits greying and prepares the wood for finishing.

Apply directly on prepared wood.
Ideal for all softwoods (pine, spruce, Red Cedar...) and especially heartwood-treated woods.
Can be used on vertical or horizontal surfaces.
Suitable for terraces, facades, decking, garden furniture...
Apply directly, before or after installation, on dry-to-touch wood in a single generous coat.
Do not apply on wood already exposed to the weather.

Cover everything that should not be treated, including plants and shrubs.
Apply between +10°C and +30°C. Do not apply in direct sunlight or on hot surfaces.
Do not apply if cold and/or wet weather is expected within 24 hours.
Carefully mix the product before application. Do not dilute.
Vertical claddings should be treated from top to bottom.
After application with a spray gun, always distribute the product with a brush or roller to improve penetration and uniformity.
Prepare the surface as indicated in 'Surface Preparation'.
The wood must be clean and dry to the touch.

Apply a generous coat on all wood surfaces.
Ensure thorough saturation of the ends.
For a grating, allow SEASONITE® to penetrate into the gaps between the planks.