Description
RUSTOL® DECO MICA is an anti-rust paint available in glossy, matte, satin, and also in three glossy mica shades. RUSTOL® DECO MICA provides enhanced anti-rust protection along with decorative features on all surfaces.
Its ultra-performing formula is highly resistant to external aggressions such as high heat, weather conditions, and humidity, and adheres well to any surface (wood, metal, garden furniture). It ensures high-quality results throughout the year.
Properties
RUSTOL-DÉCO is an anti-rust paint available in glossy, matte, satin, and three glossy mica shades as well. It provides enhanced and decorative anti-rust protection on all surfaces.
• Easy to use.
• Can be applied directly onto rust thanks to the penetration, insulation, and adhesion qualities of RUSTOL-OWATROL®*.
• Adheres to all surfaces; RUSTOL-DÉCO penetrates even the smallest pores, grips securely, and truly becomes one with the surface.
• Very good resistance to weather conditions, humidity, and pollution.
• Can be applied directly onto lightly rusted metals.
• Flexible, non-brittle film.
• Resistant to temperatures up to +175°C.
• Easy to use.
• Can be applied directly onto rust thanks to the penetration, insulation, and adhesion qualities of RUSTOL-OWATROL®*.
• Adheres to all surfaces; RUSTOL-DÉCO penetrates even the smallest pores, grips securely, and truly becomes one with the surface.
• Very good resistance to weather conditions, humidity, and pollution.
• Can be applied directly onto lightly rusted metals.
• Flexible, non-brittle film.
• Resistant to temperatures up to +175°C.
Destination
• Suitable for interior and exterior use.
• Applicable on ferrous and non-ferrous metals - galvanized, aluminum, zinc - wood, plastics, expanded polystyrene, and even glass.
• Ideal for use on grilles, balconies, garden furniture, shutters, verandas, various metal structures... as well as doors, frames, furniture, radiators, pipes, machinery, and more.
• Applicable on ferrous and non-ferrous metals - galvanized, aluminum, zinc - wood, plastics, expanded polystyrene, and even glass.
• Ideal for use on grilles, balconies, garden furniture, shutters, verandas, various metal structures... as well as doors, frames, furniture, radiators, pipes, machinery, and more.
Recommendations before application
The surface to be treated must be clean, dry, and free from grease stains. For oxidized surfaces or those previously painted, remove any non-adherent parts and sand the surface lightly.
• Always estimate the amount of paint needed to ensure completion of the work.
• Mix the pots together for each coat.
• Do not dilute.
• Stir well before and during use to keep the pigments suspended.
• For oxidized surfaces, lightly brush with a metal brush.
• For surfaces previously painted and/or heavily oxidized, it is recommended to apply a coat of pure RUSTOL-OWATROL®* before the first coat of RUSTOL-DÉCO for better long-term results.
• If using a spray gun, add 5 to 10% RUS
• Always estimate the amount of paint needed to ensure completion of the work.
• Mix the pots together for each coat.
• Do not dilute.
• Stir well before and during use to keep the pigments suspended.
• For oxidized surfaces, lightly brush with a metal brush.
• For surfaces previously painted and/or heavily oxidized, it is recommended to apply a coat of pure RUSTOL-OWATROL®* before the first coat of RUSTOL-DÉCO for better long-term results.
• If using a spray gun, add 5 to 10% RUS
Application
Do not dilute.
• Apply one coat of RUSTOL-DÉCO. Allow to dry for 24 hours.
• Apply a second coat of RUSTOL-DÉCO.
Maintenance:
Regular Renovation:
Apply one or two coats depending on the condition after cleaning, removing any non-adherent parts, and sanding the surface.
Overdue Renovation:
For a highly damaged surface, return to the bare substrate by sanding or stripping, then apply 2 coats.
Note: After sanding/sanding, always thoroughly dust off the surface.
• Apply one coat of RUSTOL-DÉCO. Allow to dry for 24 hours.
• Apply a second coat of RUSTOL-DÉCO.
Maintenance:
Regular Renovation:
Apply one or two coats depending on the condition after cleaning, removing any non-adherent parts, and sanding the surface.
Overdue Renovation:
For a highly damaged surface, return to the bare substrate by sanding or stripping, then apply 2 coats.
Note: After sanding/sanding, always thoroughly dust off the surface.
| Application temperature | +5°C to +35°C |
|---|---|
| Finish | Gloss |
| Coverage per coat | 12 to 15 m²/l |