RENOCLEAR : Bleaching agent

RENOCLEAR is designed as a bleaching agent to rejuvenate and restore the uniform appearance of wood surfaces affected by discoloration or dark patches caused by natural aging or environmental pollution, such as sap staining. Additionally, it effectively lightens staining caused by Blue Stain Fungi, providing a refreshed look to the wood.

Lightens discoloration and/or darkening caused by natural staining and aging.
Effectively lightens discoloration and/or darkening due to Blue Stain Fungi.
Restores a uniform appearance without requiring sanding.
Eliminates marks resulting from tannin streaks.
Suitable for use on all types of modified wood.

Exterior only.
All Wood Types: Soft and Hardwoods inc. Exotic woods.
Modified Woods: Accoya, Thermo Treated, Bamboo…
Decking, Cladding, Garden Furniture…

Use RENOCLEAR as is; do not dilute.
Ensure the surface is completely dry.
Apply RENOCLEAR evenly. If using a garden sprayer, use a plastic spray nozzle, then brush or roll over the surface for better penetration.
Allow RENOCLEAR to work for 6 to 24 hours, depending on the severity of the staining.
DO NOT rinse or wet the surface before the next step.
Dilute SOAPCLEAN at a ratio of 1:4.
Scrub the surface with a deck brush and let it work for 5 minutes.
Rinse thoroughly with plenty of fresh, clean water.
Allow the wood to dry for 2 to 3 days or until the moisture content is 18% or less before applying the finish.
Note: For stubborn stains, you may need to repeat the process. The final result of RENOCLEAR will only be visible once the surface is fully dry.