Description
PURA-TROL is a versatile, water-based, industrial-strength cleaner suitable for a wide range of surfaces, including cars, boats, and engines. Its powerful degreasing properties make it ideal for surface preparation before varnishing.
It's perfect for cleaning car alloys by removing embedded brake dust and grime, and also excellent for degreasing a dirty cooker hood during a kitchen revamp.
PURA-TROL effectively removes a broad spectrum of tough stains without damaging the surface. This concentrated product is free of solvents and acids and can be diluted with water up to 20 times.
Destination
Suitable for cleaning a diverse range of surfaces, including vehicles, alloys, and engines.
Excellent for revitalizing and cleaning your boat.
Perfect for degreasing surfaces such as cooker hoods.
Effectively degrease surfaces in preparation for varnishing.
Excellent for revitalizing and cleaning your boat.
Perfect for degreasing surfaces such as cooker hoods.
Effectively degrease surfaces in preparation for varnishing.
Recommendations before application
Dilutions:
Dirty Surfaces: 1 part PURA-TROL to 20 parts Water.
Very Dirty Surfaces: 1 part PURA-TROL to 10 parts Water.
Concentrated formula. Use only the recommended dilutions. Do not use undiluted.
Dirty Surfaces: 1 part PURA-TROL to 20 parts Water.
Very Dirty Surfaces: 1 part PURA-TROL to 10 parts Water.
Concentrated formula. Use only the recommended dilutions. Do not use undiluted.
Application
Make up diluted solution as dictated by the surface contamination.
Stir or shake solution well to ensure PURA-TROL is well mixed in.
Apply diluted PURA-TROL to surface using brush, sponge or pump sprayer.
Allow to work 10 minutes.
Do not allow solution to dry on the surface while working.
Rinse surface with fresh clean water using a hose, power washer or bucket and sponge (change water regularly).
Stir or shake solution well to ensure PURA-TROL is well mixed in.
Apply diluted PURA-TROL to surface using brush, sponge or pump sprayer.
Allow to work 10 minutes.
Do not allow solution to dry on the surface while working.
Rinse surface with fresh clean water using a hose, power washer or bucket and sponge (change water regularly).