Properties
Suitable for both horizontal and vertical surfaces.
Offers high UV resistance.
Perfect for dense, oily, or hard-to-impregnate hardwood.
Delivers a long-lasting natural finish.
Boasts excellent penetration.
Does not form a film; it must penetrate the wood rather than sit on the surface.
Suitable for both interior and exterior use.
Provides a mildew-resistant finish. Easy to use and maintain (no stripping, no sanding required). Allows for easy local touch-ups.
Offers high UV resistance.
Perfect for dense, oily, or hard-to-impregnate hardwood.
Delivers a long-lasting natural finish.
Boasts excellent penetration.
Does not form a film; it must penetrate the wood rather than sit on the surface.
Suitable for both interior and exterior use.
Provides a mildew-resistant finish. Easy to use and maintain (no stripping, no sanding required). Allows for easy local touch-ups.
Destination
Tropical hardwoods such as Ipe, Teak, Bangkirai, Mahogany...
Can be applied directly onto prepared woods.
Suitable for exterior applications including decking, garden furniture, fences, cladding...
Also suitable for interior use on floors, stairs, door & window frames...
Works effectively on both horizontal and vertical surfaces.
Application
Shake or stir the can well before use.
Begin by applying a generous first coat of D.1 PRO to a manageable area that can be treated within 15 minutes, allowing it to penetrate (usually 15-30 minutes).
Apply a second coat as soon as the first coat has penetrated, allowing it to penetrate as well.
Continue this "wet-on-wet" application of D.1 PRO until the wood is fully saturated and will accept no more oil.
Allow the final application to sit for 20-30 minutes, then brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
Do not allow D.1 PRO to become touch dry or dry between applications.
Note: D.1 PRO is not a surface coating; its purpose is to penetrate the wood, providing a rich matte finish while protecting it.
Begin by applying a generous first coat of D.1 PRO to a manageable area that can be treated within 15 minutes, allowing it to penetrate (usually 15-30 minutes).
Apply a second coat as soon as the first coat has penetrated, allowing it to penetrate as well.
Continue this "wet-on-wet" application of D.1 PRO until the wood is fully saturated and will accept no more oil.
Allow the final application to sit for 20-30 minutes, then brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
Do not allow D.1 PRO to become touch dry or dry between applications.
Note: D.1 PRO is not a surface coating; its purpose is to penetrate the wood, providing a rich matte finish while protecting it.