Description
Protect your wood against outdoor aggressions with COSMOBOIS two-component wood filler. It fills and repairs damaged surfaces, providing high resistance and ultra-fast drying in just 10 minutes. Very easy to sand, it is ideal for repairing furniture and garden furniture.
Properties
Fill holes, cracks...
Very easy to use - easy sanding.
Quick drying.
Hardens in 10 minutes with no shrinkage.
Compatible with all single or two-component finishes.
Available in 3 shades. Can be tinted with universal colorants (contact us for more information).
Very easy to use - easy sanding.
Quick drying.
Hardens in 10 minutes with no shrinkage.
Compatible with all single or two-component finishes.
Available in 3 shades. Can be tinted with universal colorants (contact us for more information).
Destination
Indoor / Outdoor.
Furniture, doors, shutters, decks, garden furniture...
Horizontal/vertical surfaces.
Furniture, doors, shutters, decks, garden furniture...
Horizontal/vertical surfaces.
Recommendations before application
Ensure that the wood is dry, clean, and free from dust. Sand if necessary.
Remove any loose parts beforehand.
Do not mix filler + hardener directly in the original container.
Store at a temperature between 10°C and 25°C.
Always perform a preliminary test on a piece of scrap wood.
Remove any loose parts beforehand.
Do not mix filler + hardener directly in the original container.
Store at a temperature between 10°C and 25°C.
Always perform a preliminary test on a piece of scrap wood.
Application
Homogenize the paste in its container using a spatula.
Sanding: Dry sandpaper, all grits depending on the finish.
Take the required amount of filler and mix it with the hardener, then apply without delay (at around 20°C). 2% hardener provides a setting time of 10 minutes.
As a guideline, the size of a coffee bean of hardener for a walnut-sized amount of filler. Spread the filler generously using a spatula. Allow to dry and work the product like wood.
Wait for 24 hours before using a machine tool (milling machine, sander...).
Sanding: Dry sandpaper, all grits depending on the finish.
Take the required amount of filler and mix it with the hardener, then apply without delay (at around 20°C). 2% hardener provides a setting time of 10 minutes.
As a guideline, the size of a coffee bean of hardener for a walnut-sized amount of filler. Spread the filler generously using a spatula. Allow to dry and work the product like wood.
Wait for 24 hours before using a machine tool (milling machine, sander...).
| Application temperature | +10°C to +25°C |
|---|---|
| Coverage per coat | Varies depending on the type of use |