Description
SANIXYL is a fungicide and insecticide. This treatment effectively and durably eliminates fungi and mold from your woods. Its highly effective formula eliminates and prevents the appearance of fungi. Your wooden surfaces are thus protected throughout the year. Ideal for the maintenance of your woods.
Properties
FUNGICIDE / INSECTICIDE
ANTI-TERMITE / ANTI-BLUE STAIN
Preventive:
• Insects: longhorn beetles, woodworms, powderpost beetles, termites.
• Wood rot fungi and wood discoloration fungi (blue stain in service**).
Curative:
• Insects: longhorn beetles, woodworms, termites***. Eliminates all insects thoroughly and prevents reinfestation.
** On already installed wood.
*** Regarding termites, curative action will be implemented by a qualified professional who will imperatively treat the soil and walls.
Termite-infested woods, depending on their infestation level, may or may not need replacement.
• Preventive and curative. Insecticide and fungicide.
• Enhanced formula: anti-termite and anti-blue staining in service**.
• Easy to apply. Ready to use. Excellent penetration.
• Non-greasy. Colorless and odorless. Non-flammable.
• Aqueous phase.
Product Type: TP8 (Wood Protection Product)
Preparation Type: liquid
Active Substances:
Permethrin: 0.250% by mass
IPBC: 0.250% by mass
Propiconazole: 0.250% by mass
ANTI-TERMITE / ANTI-BLUE STAIN
Preventive:
• Insects: longhorn beetles, woodworms, powderpost beetles, termites.
• Wood rot fungi and wood discoloration fungi (blue stain in service**).
Curative:
• Insects: longhorn beetles, woodworms, termites***. Eliminates all insects thoroughly and prevents reinfestation.
** On already installed wood.
*** Regarding termites, curative action will be implemented by a qualified professional who will imperatively treat the soil and walls.
Termite-infested woods, depending on their infestation level, may or may not need replacement.
• Preventive and curative. Insecticide and fungicide.
• Enhanced formula: anti-termite and anti-blue staining in service**.
• Easy to apply. Ready to use. Excellent penetration.
• Non-greasy. Colorless and odorless. Non-flammable.
• Aqueous phase.
Product Type: TP8 (Wood Protection Product)
Preparation Type: liquid
Active Substances:
Permethrin: 0.250% by mass
IPBC: 0.250% by mass
Propiconazole: 0.250% by mass
Destination
Healthy or attacked interior woods: vertical and horizontal surfaces (paneling, stairs, floors, furniture...).
Healthy or attacked exterior woods: vertical surfaces (claddings, frames...) excluding hardwoods.
Effective for use classes: 1, 2, and 3a.
Healthy or attacked exterior woods: vertical surfaces (claddings, frames...) excluding hardwoods.
Effective for use classes: 1, 2, and 3a.
Recommendations before application
Wear appropriate protective clothing, gloves, and eye/face protection.
Do not use the treatment near a heat source. Do not treat beehives.
Shake the product before application. Ventilate the application area.
Do not use the treatment near a heat source. Do not treat beehives.
Shake the product before application. Ventilate the application area.
Application
• For new and healthy wood: generously brush until the support is saturated or spray with a garden sprayer, adjusting the nozzle to avoid creating a mist. Pay attention to the ends.
• For attacked wood: probe and remove (eliminate decayed parts). Reinforce or replace weakened parts. Brush, for small section woods, until saturation, especially on the ends.
• For heavily attacked wood: staggered drilling every 20 cm for large sections and every 40 cm for smaller sections, then inject SANIXYL. Finish with surface brushing.
Can be used by soaking: consult us.
Note: Clean tools immediately after use.
• For attacked wood: probe and remove (eliminate decayed parts). Reinforce or replace weakened parts. Brush, for small section woods, until saturation, especially on the ends.
• For heavily attacked wood: staggered drilling every 20 cm for large sections and every 40 cm for smaller sections, then inject SANIXYL. Finish with surface brushing.
Can be used by soaking: consult us.
Note: Clean tools immediately after use.
| Application temperature | +5°C to +35°C |
|---|---|
| Coverage per coat | Preventive: 5 m²/l Curative: 3 m²/l |