Properties
Protects and decorates wooden structures with long-lasting slip resistance.
Prevents graying.
Contains non-slip microbeads made of micronized polypropylene wax (particle size: 100 microns).
Easy application.
Prevents graying.
Contains non-slip microbeads made of micronized polypropylene wax (particle size: 100 microns).
Easy application.
Destination
Outdoor wood.
Apply directly onto prepared wood.
Horizontal surfaces.
Softwood, treated or untreated, dense, exotic wood.
Brushed or planed finish.
Apply directly onto prepared wood.
Horizontal surfaces.
Softwood, treated or untreated, dense, exotic wood.
Brushed or planed finish.
Recommendations before application
Do not dilute. Thoroughly mix the product before and during application (for 2 to 3 minutes with an appropriate helical mixer).
Application
On prepared surface, apply a coat of Antigliss over the entire blade in the direction of the wood grain. Allow to dry for a minimum of 6 hours (at 20°C and 65% RH), then apply a second coat. Complete drying takes 24 hours. Ambient temperature and relative humidity affect drying time. If using a spray gun, immediate smoothing is always recommended to improve penetration and provide a uniform appearance.
Putting the structure into service:
Light traffic between 24 hours and 5 days.
Normal traffic after 5 days.
Putting the structure into service:
Light traffic between 24 hours and 5 days.
Normal traffic after 5 days.
| Application temperature | +10°C to +30°C |
|---|---|
| Finish | Satin |
| Coverage per coat | 4 m²/l |