Description
EASY FLOW FLOETROL® is a water-based additive that improves the flow and leveling properties of acrylic and emulsion paints during difficult weather conditions (high temperatures, drafts, etc.).
Properties
Special additive for creating a POURING effect.
Specially formulated to be mixed with colored acrylic paints, EASY FLOW FLOETROL® allows you to easily achieve multi-colored cells.
Results in a painting with a smooth matte-satin finish and a beautiful depth effect.
Specially formulated to be mixed with colored acrylic paints, EASY FLOW FLOETROL® allows you to easily achieve multi-colored cells.
Results in a painting with a smooth matte-satin finish and a beautiful depth effect.
Destination
All your supports for artistic creations pouring.
Recommendations before application
Same as that recommended on the paint can with which EASY FLOW FLOETROL® will be mixed.
Application
Make an application of paint mixed with EASY FLOW FLOETROL®.
If the paint dries too quickly, if it drags or ropes, add EASY FLOW FLOETROL® until it spreads easily.
Brush or roller: Add 7 to 15% per liter of paint.
Air gun or compressed air: Add 5 to 10% per liter of paint to achieve the required consistency. If the paint thickens, add a spoonful of water per liter of paint.
Airless gun: Add 10% per liter of paint.
Decorative effects: Add 20 to 25% per liter of paint.
Do not add EASY FLOW FLOETROL® to alkyd paints, especially glycerophthalic ones.
Do not add to transparent acrylic varnishes.
Always perform a preliminary test; the mixture should be homogeneous.
If the paint dries too quickly, if it drags or ropes, add EASY FLOW FLOETROL® until it spreads easily.
Brush or roller: Add 7 to 15% per liter of paint.
Air gun or compressed air: Add 5 to 10% per liter of paint to achieve the required consistency. If the paint thickens, add a spoonful of water per liter of paint.
Airless gun: Add 10% per liter of paint.
Decorative effects: Add 20 to 25% per liter of paint.
Do not add EASY FLOW FLOETROL® to alkyd paints, especially glycerophthalic ones.
Do not add to transparent acrylic varnishes.
Always perform a preliminary test; the mixture should be homogeneous.
| Application temperature | +5°C to +35°C |
|---|