PRIMER AP 60 : Matte rust-proof primer and finish.

PRIMER AP.60 is both a primer and a matt finish suitable for all surfaces based on OWATROL® OIL, which effectively stops and stabilizes rust in the long term. It can be applied to various surfaces: metal, wood, PVC...

Its highly effective formula protects your materials from external aggressions (high heat, UV rays, sunlight).

It ensures a high-quality result and provides excellent adhesion to your finishing paints for a more efficient and durable outcome.

PRIMER AP.60 is both a primer and a matte finish for all surfaces based on OWATROL® OIL* which stops and stabilizes rust permanently. It can be applied on various surfaces: metal, wood, PVC...
• Provides enhanced anti-rust and decorative protection.
• Applies directly on rust and lightly oxidized metals.
• Enhanced UV protection. Flexible, non-brittle film.
• Resistant to temperatures up to +175°C.
• As a primer, it can be coated with oil-based/glycero/alkyd-urethane, single-component alkyd paints.
• Ready to use.
• The white color can be tinted with a universal dye (contact us for more information).

• All substrates:

Wood, PVC, tiles, fibro-cement...
Ferrous and non-ferrous metals: galvanized, aluminum, zinc...
• Exterior: grilles, balconies, garden furniture, shutters, verandas, various metal structures...
• Interior: doors, door frames, furniture, radiators, piping...

• The surface must be prepared, clean, dry, and non-greasy. Adhere to the current DTU regulations.
• On surfaces with light/heavy oxidation and/or previously painted surfaces, remove any non-adherent rust or paint beforehand.

Apply as a primer in one coat.

For finishing, apply one to two additional coats. Allow 24/48 hours to dry between coats.

For new surfaces: apply directly 1 to 2 coats of PRIMER AP.60.

For lightly oxidized surfaces: lightly brush with a wire brush followed by 1 to 2 coats of PRIMER AP.60.

For heavily oxidized surfaces: follow the above method but add 5 to 20% of OWATROL® OIL* to the PRIMER AP.60 in the first coat.

For previously painted and oxidized surfaces: it is recommended to apply a coat of pure OWATROL® OIL* before the first coat of PRIMER AP.60.

For non-ferrous metal surfaces: blocks all corrosion (zinc, aluminum, copper...). Does not require sanding on zinc and galvanized steel. Application as per "New Surfaces".

APPLICATION TIPS

Stir well before and during application to keep the pigments suspended.

Do not dilute.

For spray application, depending on the type of nozzle used, add 5 to 20% of OWATROL® OIL* to the PRIMER AP.60 to achieve the desired viscosity.

Apply between +5°C and +35°C. Do not apply on very hot surfaces.

When applying on wood, the wood moisture should not exceed 18% according to current standards (DTU).