Description
POLYTROL® is a colour restorer for plastic, chrome, metal, and PVC surfaces. It is designed to revive and enhance a wide range of interior and exterior surfaces.
POLYTROL® restores dull or faded materials such as plastic, metal, wood, and stone. It is highly useful for rejuvenating your garden furniture, shutters, cladding, bike, car, and more.
Properties
Renovation: POLYTROL® revitalizes dull, discolored, and oxidized surfaces, giving them a new appearance.
Protection: POLYTROL® provides long-lasting protection against UV rays, corrosion, and weathering.
Versatile: POLYTROL® is suitable for various surfaces such as plastic, rubber, PVC, metal, fiberglass, etc.
Easy to use: Applying POLYTROL® is simple and quick.
Economical: A small quantity of POLYTROL® is sufficient to treat large surfaces, making it an economical product.
Protection: POLYTROL® provides long-lasting protection against UV rays, corrosion, and weathering.
Versatile: POLYTROL® is suitable for various surfaces such as plastic, rubber, PVC, metal, fiberglass, etc.
Easy to use: Applying POLYTROL® is simple and quick.
Economical: A small quantity of POLYTROL® is sufficient to treat large surfaces, making it an economical product.
Destination
The POLYTROL® renovator is used on plastic garden furniture, PVC joinery, car bumpers, rubber boots, fiberglass boats, terracotta tiles, PVC pipes, outdoor toys, and much more.
Recommendations before application
Before applying POLYTROL®, always ensure that surfaces are clean and free from grease, silicone stains, and completely dry.
To clean, use a solvent or water with detergent for metal surfaces and NET-TROL® for plastic.
Rinse thoroughly and let dry for a minimum of 12 hours.
Mask areas that are not to be treated.
To clean, use a solvent or water with detergent for metal surfaces and NET-TROL® for plastic.
Rinse thoroughly and let dry for a minimum of 12 hours.
Mask areas that are not to be treated.
Application
Clean the surface to be treated to remove dirt and dust.
Apply POLYTROL® using a brush or a clean, dry cloth.
Spread the product evenly over the surface.
Allow to dry for 10 to 20 minutes, then wipe off the excess with a clean, lint-free cloth.
It is important to note that POLYTROL® should not be applied to hot surfaces or surfaces exposed to direct sunlight. Therefore, make sure to work in a shaded area at room temperature. Once you have applied the product, allow it to dry completely before touching the treated surface.
For a shinier finish, apply a second coat of POLYTROL® after 24 hours of drying time for the first coat. This will give your surface an even fresher and revitalized appearance.
Don't forget to clean your tools immediately after use. Use soapy water to remove any POLYTROL® residue. If you spill the product on unwanted surfaces, wipe it off immediately with a clean, damp cloth.
By following these simple instructions, you can easily restore and protect your metal and plastic surfaces with POLYTROL®. Enjoy the new and shiny look of your items and give them a second life with this quality product.
Apply POLYTROL® using a brush or a clean, dry cloth.
Spread the product evenly over the surface.
Allow to dry for 10 to 20 minutes, then wipe off the excess with a clean, lint-free cloth.
It is important to note that POLYTROL® should not be applied to hot surfaces or surfaces exposed to direct sunlight. Therefore, make sure to work in a shaded area at room temperature. Once you have applied the product, allow it to dry completely before touching the treated surface.
For a shinier finish, apply a second coat of POLYTROL® after 24 hours of drying time for the first coat. This will give your surface an even fresher and revitalized appearance.
Don't forget to clean your tools immediately after use. Use soapy water to remove any POLYTROL® residue. If you spill the product on unwanted surfaces, wipe it off immediately with a clean, damp cloth.
By following these simple instructions, you can easily restore and protect your metal and plastic surfaces with POLYTROL®. Enjoy the new and shiny look of your items and give them a second life with this quality product.
| Application temperature | +5°C to +35°C |
|---|---|
| Coverage per coat | ± 18 m²/l |
| Finish | Satin |