Description
Allow your plastics and metals to withstand the test of time and resist external aggressions with the POLYTROL® renovator. It provides high protection and revitalizes the colors of your materials. Its ultra-performance formula without silicone works deeply and ensures a quality result.
Ideal for your renovation projects on your car, motorcycle, or plastic garden furniture.
Properties
Revives the color and appearance of faded plastics and gelcoats.
Restores shine and provides protection for polished metals (bronze, copper, stainless steel, brass...), chrome, and anodized surfaces (aluminum of windows, verandas...).
Regenerates marble, tiles, and terracotta.
Restores shine and provides protection for polished metals (bronze, copper, stainless steel, brass...), chrome, and anodized surfaces (aluminum of windows, verandas...).
Regenerates marble, tiles, and terracotta.
Destination
For plastics, dull gelcoats, polished metals (bronze, copper, stainless steel, brass...), chromed and anodized (aluminum window frames, verandas...), marble, tiles, terracotta...
Recommendations before application
Before applying POLYTROL®, always ensure that surfaces are clean and free from grease, silicone stains, and completely dry.
If cleaning is necessary, use a solvent or a mixture of water and detergent for metal surfaces, and preferably NET-TROL® for plastic.
Rinse thoroughly and let dry for a minimum of 12 hours.
Mask areas that are not to be treated.
If cleaning is necessary, use a solvent or a mixture of water and detergent for metal surfaces, and preferably NET-TROL® for plastic.
Rinse thoroughly and let dry for a minimum of 12 hours.
Mask areas that are not to be treated.
Application
Apply POLYTROL® carefully, saturating the surface. Beware of drips (for metal surfaces, carefully sand with very fine steel wool, well soaked in POLYTROL®).
Allow to act for 10 to 20 minutes, then remove excess product by wiping with a clean, lint-free cloth or absorbent paper.
Allow to dry for at least 24 hours before use.
Allow to act for 10 to 20 minutes, then remove excess product by wiping with a clean, lint-free cloth or absorbent paper.
Allow to dry for at least 24 hours before use.
| Application temperature | +5°C to +35°C |
|---|---|
| Coverage per coat | ± 18 m²/l |
| Finish | Satin |