Description
OWAYELL is a treatment that removes yellowing, scale, and rust from your gelcoats deep down to revive the brightness of your surfaces yellowed by time. It cleans and degreases without aggressing your hulls. Its ultra-performing formula guarantees you a quick and effective result. Ideal for the maintenance of your boats.
Properties
Degreases, breaks down limestone, removes traces and rust spots on gelcoat, stainless steel... in minutes.
Gel formula, does not drip.
Eliminates yellowing, green and black traces, and rust. Revives and whitens gelcoat.
Descaling by solubilizing limestone, sea salt, and water flow marks: hulls, plexiglass portholes...
Unclogs and renovates non-slip surfaces.
Breaks down dirt caused by microorganisms and residues from barnacles / shellfish present on their favorite adhesion areas.
Removes streaks and rust marks. Passivates steel.
Restores shine to stainless steel (removes rust spots), anodized aluminum, and chrome surfaces damaged by salt and limestone.
Quick and easy action.
Gel formula, does not drip.
Eliminates yellowing, green and black traces, and rust. Revives and whitens gelcoat.
Descaling by solubilizing limestone, sea salt, and water flow marks: hulls, plexiglass portholes...
Unclogs and renovates non-slip surfaces.
Breaks down dirt caused by microorganisms and residues from barnacles / shellfish present on their favorite adhesion areas.
Removes streaks and rust marks. Passivates steel.
Restores shine to stainless steel (removes rust spots), anodized aluminum, and chrome surfaces damaged by salt and limestone.
Quick and easy action.
Destination
Polyester/gelcoat, anodized aluminum, plexiglass, glass, stainless steel...
Hull, deck, hull, portholes, keel, propeller shafts, drives, railings, stanchions, cleats, bollards, stainless steel rigging, masts, and booms...
Never use on galvanized or raw aluminum.
Hull, deck, hull, portholes, keel, propeller shafts, drives, railings, stanchions, cleats, bollards, stainless steel rigging, masts, and booms...
Never use on galvanized or raw aluminum.
Recommendations before application
• Protect everything that should not be treated, including polyoxymethylene (acetal) parts.
• Do not apply in full sunlight during the hottest hours of the day.
• If used on clean steel, lacquer, paints, and varnishes, limit the contact time to a maximum of 5 minutes.
• Always perform a preliminary test on a small hidden surface.
• Wear rubber gloves, appropriate protection, and goggles.
• Do not apply in full sunlight during the hottest hours of the day.
• If used on clean steel, lacquer, paints, and varnishes, limit the contact time to a maximum of 5 minutes.
• Always perform a preliminary test on a small hidden surface.
• Wear rubber gloves, appropriate protection, and goggles.
Application
Shake the product before use.
Use undiluted.
Apply OWAYELL to the surface to be treated.
Let it sit for between 5 and 10 minutes (temperature 20°C and 50% RH). Adjust contact time according to the desired use. Mechanical action is not necessary.
Rinse thoroughly with clean water (simple water jet) from top to bottom.
If necessary, the operation can be repeated.
Use undiluted.
Apply OWAYELL to the surface to be treated.
Let it sit for between 5 and 10 minutes (temperature 20°C and 50% RH). Adjust contact time according to the desired use. Mechanical action is not necessary.
Rinse thoroughly with clean water (simple water jet) from top to bottom.
If necessary, the operation can be repeated.
| Application temperature | +10°C to +30°C |
|---|