Description
Allow your materials to withstand the test of time with OWALAK. This lacquer ensures glossiness and protection of your materials against rust. Its ultra-performing formula contains UV inhibitors for long-lasting results against fading. It allows for easy and effective maintenance for any equipment exposed to extreme weather conditions.
Easy to use and ready to apply. Ideal for combating corrosion.
Properties
Single-component high technology modified alkyd lacquer.
Excellent retention of gloss and color.
Anti-corrosion properties.
Contains UV inhibitors.
Suitable for extreme weather conditions.
Renovates, protects, and decorates dead works. Easy application.
Very good mechanical and chemical resistance.
Flexible and adherent on all substrates.
Perfect leveling. Easy cleaning.
Ready to use.
Excellent retention of gloss and color.
Anti-corrosion properties.
Contains UV inhibitors.
Suitable for extreme weather conditions.
Renovates, protects, and decorates dead works. Easy application.
Very good mechanical and chemical resistance.
Flexible and adherent on all substrates.
Perfect leveling. Easy cleaning.
Ready to use.
Destination
Indoor and outdoor use.
Surfaces: metal (aluminum, steel, galvanized...), wood, old finishes (lacquers, paints), polyester, gelcoat above the waterline.
Surfaces: metal (aluminum, steel, galvanized...), wood, old finishes (lacquers, paints), polyester, gelcoat above the waterline.
Recommendations before application
• Stir well.
• The surface must be perfectly dry, clean, and degreased.
• Perform a preliminary test.
• The temperature of the substrate should be between 5°C and 35°C.
• The ambient temperature should be between 5°C and 30°C.
• Be aware of morning dew and the risk of rain.
• Do not apply in full sunlight during the hottest hours of the day. Ensure that it will not rain within 24/48 hours after application.
Relative humidity should be around 50% for optimal drying. Do not apply on surfaces exceeding 25°C.
• The surface must be perfectly dry, clean, and degreased.
• Perform a preliminary test.
• The temperature of the substrate should be between 5°C and 35°C.
• The ambient temperature should be between 5°C and 30°C.
• Be aware of morning dew and the risk of rain.
• Do not apply in full sunlight during the hottest hours of the day. Ensure that it will not rain within 24/48 hours after application.
Relative humidity should be around 50% for optimal drying. Do not apply on surfaces exceeding 25°C.
Application
Drying times are provided for a temperature of approximately 20°C with 50% relative humidity.
If atmospheric conditions are lower or higher than these data, this should be taken into consideration to adjust drying and overcoating times.
Apply OWALAK in thin coats, preferably with a lacquer roller or spray gun. Allow between 4 and 8 hours drying time between each coat. Apply in 2 or even 3 coats if necessary.
Apply approximately 150 microns wet per coat. This results in a dry film thickness of approximately 90 microns per thin coat.
| Application temperature | +10°C to +30°C |
|---|---|
| Finish | Gloss |
| Coverage per coat | 10 to 12 m²/l |