Description
NET-TROL® wood cleaner and brightener has been specially designed to revive weathered woods without discoloration. It restores the wood's brightness. Its ultra-performance formula, water-based and biodegradable, acts very quickly in just 15 minutes.
Ideal for your renovation projects.
To be used in combination with AQUANETT degreaser.
Properties
Brightening cleaning gel for all surfaces.
Brightens all weathered, autoclaved or non-autoclaved woods without discoloring them.
Cleans tannin stains from certain woods.
Removes all traces related to weathering, mold, rust, pollution...
Restores shine to plastics that have become powdery due to UV exposure.
Use as a neutralizer after using the DILUNETT stripper on absorbent surfaces.
Excellent degreaser before applying the DEKS OLJE D1 saturator on exotic woods.
Neutral towards surfaces. Non-aggressive product.
Biodegradable - solvent-free (rinse with water).
Brightens all weathered, autoclaved or non-autoclaved woods without discoloring them.
Cleans tannin stains from certain woods.
Removes all traces related to weathering, mold, rust, pollution...
Restores shine to plastics that have become powdery due to UV exposure.
Use as a neutralizer after using the DILUNETT stripper on absorbent surfaces.
Excellent degreaser before applying the DEKS OLJE D1 saturator on exotic woods.
Neutral towards surfaces. Non-aggressive product.
Biodegradable - solvent-free (rinse with water).
Destination
Exterior weathered or dirty wood: Red Cedar, larch, pine (treated or untreated), teak, iroko, ipê,...
Horizontal or vertical surfaces: decks, cladding, fences, boat decks, garden furniture,...
Other substrates: cement stained with rust, greenish stones, powdery plastic.
Horizontal or vertical surfaces: decks, cladding, fences, boat decks, garden furniture,...
Other substrates: cement stained with rust, greenish stones, powdery plastic.
Recommendations before application
• Protect everything that should not be treated, including plants.
• Apply between +5°C and +35°C. Do not apply in direct sunlight or on very hot wood.
• Shake well before use.
• Apply between +5°C and +35°C. Do not apply in direct sunlight or on very hot wood.
• Shake well before use.
Application
Shake the product well before use.
Always wet the surface with clean, fresh water before application.
Apply NET-TROL® to the surface using a brush or synthetic roller (long-haired).
Scrub the areas to be cleaned with a hard-bristled nylon brush.
Let it sit for approximately 10 to 20 minutes.
Rinse thoroughly with plenty of water while scrubbing or using water under pressure (maximum 60 bars).
Repeat the application if necessary.
Refer to the instructions on the packaging for detailed application guidelines.
Always wet the surface with clean, fresh water before application.
Apply NET-TROL® to the surface using a brush or synthetic roller (long-haired).
Scrub the areas to be cleaned with a hard-bristled nylon brush.
Let it sit for approximately 10 to 20 minutes.
Rinse thoroughly with plenty of water while scrubbing or using water under pressure (maximum 60 bars).
Repeat the application if necessary.
Refer to the instructions on the packaging for detailed application guidelines.
| Application temperature | +10°C to +30°C |
|---|---|
| Coverage per coat | 5 to 10 m²/l |