Description
E.S.P. is a clear water-based bonding primer.
It is effective on all smooth surfaces, avoiding tedious prior preparation. Specially formulated for your smooth interior or exterior surfaces that lack adhesion: tiles, PVC, glass, etc.
Easy to use, it can be applied with a brush or cloth and dries in 2 hours. This primer is ideal before applying your paints or for sanding or polishing work. It adheres perfectly to smooth surfaces and ensures a quality result.
Properties
OWATROL® E.S.P. prevents any dulling, sanding, and stripping...
Ensures effortless adhesion of paints, varnishes...
Colorless, does not mask the substrate.
Odorless.
Does not attack either the existing substrate or the old coating.
Ensures effortless adhesion of paints, varnishes...
Colorless, does not mask the substrate.
Odorless.
Does not attack either the existing substrate or the old coating.
Destination
Ideal for: tiles, laminates, glass, PVC, lacquer, varnish...
Recommendations before application
Ensure that the new finish is compatible with the old one.
Do not use before epoxy and two-component coatings.
Remove scales of old paints.
To remove grease or wax, sand the surface with a No. 00 steel wool saturated with ESP, then proceed to apply the product.
Always wipe the ESP before it dries.
Use clean cloths and change them regularly.
Do not contaminate clean ESP with ESP that has already been used.
Do not use ESP by immersion.
Do not use before epoxy and two-component coatings.
Remove scales of old paints.
To remove grease or wax, sand the surface with a No. 00 steel wool saturated with ESP, then proceed to apply the product.
Always wipe the ESP before it dries.
Use clean cloths and change them regularly.
Do not contaminate clean ESP with ESP that has already been used.
Do not use ESP by immersion.
Application
Generously apply a layer of E.S.P.
Allow it to sit for 5 minutes then wipe the surface with a clean, dry, lint-free cloth.
Wait for a minimum of 2 hours before applying the finish and up to a maximum of 7 days.
Application temperature | +5°C to +35°C |
---|---|
Coverage per coat | ± 18 m²/l |
Finish | Matte |