Description
Allow your exotic woods to resist external aggressions (humidity, sunlight, stains) with TEAK-OLJE. This teak oil for your garden furniture protects and deeply nourishes your wood.
Easy to use, it applies with a brush or roller and dries in 15-20 minutes. Two coats are necessary to ensure optimal protection and to restore the natural beauty of the wood.
Ideal for enhancing your terraces and garden furniture.
Properties
Protects and nourishes the wood deeply.
Preserves the natural appearance of the wood over time.
Non-film-forming: does not peel off.
Easy and quick maintenance without scrubbing, sanding, or stripping.
Preserves the natural appearance of the wood over time.
Non-film-forming: does not peel off.
Easy and quick maintenance without scrubbing, sanding, or stripping.
Destination
Outdoor use.
On vertical surfaces (siding, chalets, garden furniture) or horizontal surfaces (deck, garden table...).
Apply directly to prepared wood.
Exotic woods: teak and other species used for garden furniture excluding keruing.
On vertical surfaces (siding, chalets, garden furniture) or horizontal surfaces (deck, garden table...).
Apply directly to prepared wood.
Exotic woods: teak and other species used for garden furniture excluding keruing.
Recommendations before application
• The wood must be clean and dry (3 days of dry weather - maximum wood humidity 18%) before applying TEAK-OLJE.
• Proper surface preparation as described in the paragraph below is essential for optimal results.
• Proper surface preparation as described in the paragraph below is essential for optimal results.
Application
Do not dilute.
Apply a layer of TEAK-OLJE. Allow the product to penetrate for 15-20 minutes.
Repeat the process with a second layer, being careful not to let it dry between coats (apply "wet on wet").
After the second layer has penetrated (15-20 minutes), wipe off any excess product with a lint-free dry cloth to avoid any shine marks.
Note: outdoors, the oiled appearance of TEAK-OLJE gradually diminishes over the following weeks depending on exposure to sunlight. When the wood lightens over time, proceed with maintenance.
Apply a layer of TEAK-OLJE. Allow the product to penetrate for 15-20 minutes.
Repeat the process with a second layer, being careful not to let it dry between coats (apply "wet on wet").
After the second layer has penetrated (15-20 minutes), wipe off any excess product with a lint-free dry cloth to avoid any shine marks.
Note: outdoors, the oiled appearance of TEAK-OLJE gradually diminishes over the following weeks depending on exposure to sunlight. When the wood lightens over time, proceed with maintenance.
Application temperature | +5°C to +35°C |
---|---|
Coverage per coat | 10 to 14 m²/l |
Finish | Matt |