Description
Allow your decks and pontoons to withstand the test of time with the all-wood DECK CLEANER. It enables easy and quick maintenance of your terraces, outdoor furniture, and claddings thanks to its ultra-performance formula that deeply cleans your woods without aggression. Easy to use, restore the original appearance of your woods in just 15 minutes.
Properties
Restores the original appearance of the surface in just a few minutes: boat decks, outdoor furniture.
• Restores a beautiful appearance to weathered wood, cork, in just 15 minutes.
• Removes superficial traces of limestone and rust.
• Degreases hardwoods (e.g., Teak) before applying the DEKS OLJE® D.1* saturator.
• Cleans surfaces greened by the weather (gelcoats, plastics, etc.).
• Rust remover and cleaner for sails: eliminates rust stains, mold.
• Neutral towards the surface. Does not damage paints, varnishes, or stains in good condition.
• Rinse with water.
• Neutralizes after using AQUANETT®*, MARINE STRIP®*, or OIL CLEANER®*.
• Restores a beautiful appearance to weathered wood, cork, in just 15 minutes.
• Removes superficial traces of limestone and rust.
• Degreases hardwoods (e.g., Teak) before applying the DEKS OLJE® D.1* saturator.
• Cleans surfaces greened by the weather (gelcoats, plastics, etc.).
• Rust remover and cleaner for sails: eliminates rust stains, mold.
• Neutral towards the surface. Does not damage paints, varnishes, or stains in good condition.
• Rinse with water.
• Neutralizes after using AQUANETT®*, MARINE STRIP®*, or OIL CLEANER®*.
Destination
• Exterior.
• All raw wood, never protected or lacking finish, grayed, soiled, stained: Teak, Ipe, Mahogany...
• Horizontal or vertical surfaces: boat decks, fences, garden furniture...
• Polyester, plexiglass, gelcoats, dirty inflatable boats, greenish ones.
• Outside marine use: gray and clean wooden terraces and cladding. Removes traces of iron sulfate on wood, stone, and tiles.
• All raw wood, never protected or lacking finish, grayed, soiled, stained: Teak, Ipe, Mahogany...
• Horizontal or vertical surfaces: boat decks, fences, garden furniture...
• Polyester, plexiglass, gelcoats, dirty inflatable boats, greenish ones.
• Outside marine use: gray and clean wooden terraces and cladding. Removes traces of iron sulfate on wood, stone, and tiles.
Recommendations before application
• Protect everything that should not be treated, including plants.
• Do not apply in direct sunlight during the hottest hours of the day. Maximum wood temperature: 30°C.
• Prolonged contact with DECK CLEANER may cause metal parts to tarnish.
• Do not use metal pads or brushes.
• Perform a preliminary test.
• Do not apply in direct sunlight during the hottest hours of the day. Maximum wood temperature: 30°C.
• Prolonged contact with DECK CLEANER may cause metal parts to tarnish.
• Do not use metal pads or brushes.
• Perform a preliminary test.
Application
Shake the product well before use.
Wet the surface with clean, fresh water.
Apply DECK CLEANER to the surface using a brush or synthetic roller (long-haired).
Scrub with a hard nylon brush, focusing on the dirtiest areas.
Let it sit for approximately 15-20 minutes.
Rinse thoroughly with a strong stream of water while scrubbing or with water under pressure (maximum 60 bars).
Repeat the application if necessary.
| Application temperature | +5°C to +35°C |
|---|---|
| Coverage per coat | 5 to 10 m²/l |