Description
Enable your items to withstand outdoor aggressions with COSMOFER universal polyester putty. It fills, seals, closes, joints, seals, isolates, glues, fixes, and evens out irregularities on various surfaces, offering great resistance. Very easy to sand, it is essential for all your repairs.
Properties
A true cold-welding. Fills, seals, closes, joints, seals, isolates, glues, fixes, and evens out irregularities on various surfaces.
• Excellent adhesion on most substrates: metal, aluminum, wood, stone, polyester,...
• Very easy to use - easy sanding.
• Possibility to adjust the setting time according to needs.
• Once hardened, can be mechanically machined, drilled, tapped, filed, ground, sawed, screwed...
• Can be coated with any type of paint (single or two-component).
• Good resistance to heat (120°C), vibrations, and chemicals.
• Highly elastic - does not crack or split; does not clog abrasives.
• Excellent adhesion on most substrates: metal, aluminum, wood, stone, polyester,...
• Very easy to use - easy sanding.
• Possibility to adjust the setting time according to needs.
• Once hardened, can be mechanically machined, drilled, tapped, filed, ground, sawed, screwed...
• Can be coated with any type of paint (single or two-component).
• Good resistance to heat (120°C), vibrations, and chemicals.
• Highly elastic - does not crack or split; does not clog abrasives.
Destination
• Interior / exterior – Horizontal / vertical.
• Adheres to ferrous and non-ferrous metals (aluminum, copper, lead...), wood, concrete, stone, marble, fiber cement, stoneware, mosaic, PVC, polyester, ABS...
• Auto / Mobile home: Rust-perforated bodywork, dented, torn or thinned sheet metal, large cavity, hole, dent, crack, fairing, casing, tank, radiator, battery tray.
• Caravan: Bodywork repair, waterproofing, leakage.
• Motorcycle: Fairing, helmet, tank, casing.
• Marine: Wooden, metal or polyester boat hull and deck, corrosion protection.
• Building: Sealing and crack repair in concrete, brick, breeze block, metal or polyester tank sealing, piping.
• DIY: Repair of rigid plastic objects, PVC, polyester, ABS, vase, basin, model, scale models.
• Electricity: All insulation (12,000 volts per mm) accumulator tank.
• Agriculture: Tank, trough, reservoir, cistern, watering trough, drum, trough, tractor and agricultural machinery.
• Central heating: Pipes, radiator, boiler, pump, thermal insulation.
• Plumbing: Supply and drainage pipes, fittings, pipe junctions, trap, flush, water heater, washbasin, sink, bathtub.
• Roofing: Roof, downpipes, gutter, gutter, frame, skylight, dormer.
• Locksmith: Fence grille, door, metal closure and curtain, shutters, wrought iron.
• Foundry: Blowholes, casting defects, lack of material, porosity, crack, mold, model, prototype parts.
• Adheres to ferrous and non-ferrous metals (aluminum, copper, lead...), wood, concrete, stone, marble, fiber cement, stoneware, mosaic, PVC, polyester, ABS...
• Auto / Mobile home: Rust-perforated bodywork, dented, torn or thinned sheet metal, large cavity, hole, dent, crack, fairing, casing, tank, radiator, battery tray.
• Caravan: Bodywork repair, waterproofing, leakage.
• Motorcycle: Fairing, helmet, tank, casing.
• Marine: Wooden, metal or polyester boat hull and deck, corrosion protection.
• Building: Sealing and crack repair in concrete, brick, breeze block, metal or polyester tank sealing, piping.
• DIY: Repair of rigid plastic objects, PVC, polyester, ABS, vase, basin, model, scale models.
• Electricity: All insulation (12,000 volts per mm) accumulator tank.
• Agriculture: Tank, trough, reservoir, cistern, watering trough, drum, trough, tractor and agricultural machinery.
• Central heating: Pipes, radiator, boiler, pump, thermal insulation.
• Plumbing: Supply and drainage pipes, fittings, pipe junctions, trap, flush, water heater, washbasin, sink, bathtub.
• Roofing: Roof, downpipes, gutter, gutter, frame, skylight, dormer.
• Locksmith: Fence grille, door, metal closure and curtain, shutters, wrought iron.
• Foundry: Blowholes, casting defects, lack of material, porosity, crack, mold, model, prototype parts.
Application
• Recommendations before application:
The substrate must be clean, dry, non-oxidized, dust-free, and degreased.
Remove any remaining corrosion and old finish beforehand.
The substrate should be as rough as possible.
• Product preparation:
Add 2% hardener to the filler for a setting time of 10 minutes. In cold weather, increase the hardener dose, while in hot weather, decrease it.
The amount of hardener will adjust the setting time without affecting the final hardening.
Example of average proportion: A coffee bean-sized hardener for a walnut-sized COSMOFER filler.
• Application:
Mix the COSMOFER filler and hardener. Once mixed, fill the areas to be filled using a spatula.
Apply a layer necessary for the repair. The hardening occurs uniformly without shrinkage. One application is sufficient.
After hardening, sand (grit 100) to achieve a perfectly smooth area for possible finishing (painting or otherwise).
• After application:
Clean tools immediately after use.
The substrate must be clean, dry, non-oxidized, dust-free, and degreased.
Remove any remaining corrosion and old finish beforehand.
The substrate should be as rough as possible.
• Product preparation:
Add 2% hardener to the filler for a setting time of 10 minutes. In cold weather, increase the hardener dose, while in hot weather, decrease it.
The amount of hardener will adjust the setting time without affecting the final hardening.
Example of average proportion: A coffee bean-sized hardener for a walnut-sized COSMOFER filler.
• Application:
Mix the COSMOFER filler and hardener. Once mixed, fill the areas to be filled using a spatula.
Apply a layer necessary for the repair. The hardening occurs uniformly without shrinkage. One application is sufficient.
After hardening, sand (grit 100) to achieve a perfectly smooth area for possible finishing (painting or otherwise).
• After application:
Clean tools immediately after use.
| Coverage per coat | Varies depending on the type of use |
|---|