Description
Allowing to withstand external aggressions, the polyester putty reinforced with incorporated fiberglass fibers, CHOUKROUT®, seals and repairs damaged surfaces while offering great mechanical strength. Very easy to sand, it is the perfect ally for smooth non-porous surfaces. Its highly effective formula is very resistant to impacts and has excellent adhesion.
Ideal for repair work.
Properties
Seals and repairs damaged surfaces while offering great mechanical strength.
• Two-component polyester putty reinforced with fiberglass to seal especially holes in substrates.
• Excellent adhesion on most surfaces: metal, aluminum, wood, stone, polyester,...
• Very easy to use - easy sanding.
• High resistance to water, petroleum, mineral spirits, diluted acids, and alkalis.
• Can be coated with any type of paint (single or two-component).
• Very good resistance to impacts.
• Two-component polyester putty reinforced with fiberglass to seal especially holes in substrates.
• Excellent adhesion on most surfaces: metal, aluminum, wood, stone, polyester,...
• Very easy to use - easy sanding.
• High resistance to water, petroleum, mineral spirits, diluted acids, and alkalis.
• Can be coated with any type of paint (single or two-component).
• Very good resistance to impacts.
Destination
• Interior / exterior – Horizontal / vertical
• Adheres to ferrous and non-ferrous metals (aluminum, copper, lead...), wood, concrete, stone, marble, fiber cement, porcelain, mosaic, PVC, polyester, ABS,...
• Auto / Mobile home: bodywork pierced by rust, torn sheet metal, large cavity, hole, dent, crack, leveling, fairing, casing, housing, radiator, battery tray.
• Caravan: bodywork repair, waterproofing.
• Marine: wooden, metal, or polyester boat hull and deck, corrosion protection.
• Building: sealing and crack repair in concrete, brick, block, metal tank, concrete or polyester tank, piping.
• Agriculture: tank, trough, reservoir, cistern, watering trough, barrel, trough, tractor, and agricultural machinery.
• Central heating: pipes, radiator, boiler, pump, thermal insulation.
• Plumbing: supply and drainage pipes, fittings, trap, flush, sink, kitchen sink, bathtub.
• Roofing: roof, downpipes, gutter, gutter, frame, skylight, dormer window.
• Locksmithing: fence grille, door, closure and metal curtain, shutters, wrought iron.
• Foundry: blowhole, casting defects, lack of material, mold.
• Adheres to ferrous and non-ferrous metals (aluminum, copper, lead...), wood, concrete, stone, marble, fiber cement, porcelain, mosaic, PVC, polyester, ABS,...
• Auto / Mobile home: bodywork pierced by rust, torn sheet metal, large cavity, hole, dent, crack, leveling, fairing, casing, housing, radiator, battery tray.
• Caravan: bodywork repair, waterproofing.
• Marine: wooden, metal, or polyester boat hull and deck, corrosion protection.
• Building: sealing and crack repair in concrete, brick, block, metal tank, concrete or polyester tank, piping.
• Agriculture: tank, trough, reservoir, cistern, watering trough, barrel, trough, tractor, and agricultural machinery.
• Central heating: pipes, radiator, boiler, pump, thermal insulation.
• Plumbing: supply and drainage pipes, fittings, trap, flush, sink, kitchen sink, bathtub.
• Roofing: roof, downpipes, gutter, gutter, frame, skylight, dormer window.
• Locksmithing: fence grille, door, closure and metal curtain, shutters, wrought iron.
• Foundry: blowhole, casting defects, lack of material, mold.
Recommendations before application
• Recommendations before application:
The surface must be clean, dry, non-oxidized, dust-free, and degreased.
Previously remove any corrosion residue and old finish.
The surface should be as rough as possible.
• Product preparation:
Add 2% hardener to the putty for a setting time of 10 minutes.
In cold weather, increase the hardener dose, while in hot weather, decrease it.
The quantity of hardener will adjust the setting time without affecting the final hardening.
Example of average proportion: One coffee bean-sized hardener for a walnut-sized CHOUKROUT putty.
The surface must be clean, dry, non-oxidized, dust-free, and degreased.
Previously remove any corrosion residue and old finish.
The surface should be as rough as possible.
• Product preparation:
Add 2% hardener to the putty for a setting time of 10 minutes.
In cold weather, increase the hardener dose, while in hot weather, decrease it.
The quantity of hardener will adjust the setting time without affecting the final hardening.
Example of average proportion: One coffee bean-sized hardener for a walnut-sized CHOUKROUT putty.
Application
• Application:
Mix the CHOUKROUT putty and the hardener. Once mixed, apply the putty to the areas to be filled using a spatula.
Apply a necessary layer for the repair. The hardening occurs uniformly without shrinkage. One application is sufficient. After hardening, it can be machine sanded.
• After application:
Clean tools immediately after use.
Be careful not to incorporate the remaining putty/hardener mixture into the pot of pure putty.
Mix the CHOUKROUT putty and the hardener. Once mixed, apply the putty to the areas to be filled using a spatula.
Apply a necessary layer for the repair. The hardening occurs uniformly without shrinkage. One application is sufficient. After hardening, it can be machine sanded.
• After application:
Clean tools immediately after use.
Be careful not to incorporate the remaining putty/hardener mixture into the pot of pure putty.
| Coverage per coat | Varies depending on the type of use |
|---|