compocare_pack-GB-DE

COMPO-CARE CN

复合木材活化剂
picto_rendement Coverage: 15 m²/l
picto_temperature Application temperature: +5°C à +35°C
picto_temps Drying: 12 to 24 h

picto_eau-Gb  

PROPERTIES

Transparent tinted coating.
Enhances the colour of composite woods.
Protects against stains (oils, grease...).
Waterproofs the surface.
Quick drying - Low odour.

WHERE TO USE

  • All exterior composite woods 
  • Direct on prepared woods
  • Vertical and horizontal surfaces: decks, cladding, garden furniture...

SURFACE PREPARATION

  • The surface must be clean, dry and free of dirt, mildew, grease...
  • Clean surface with COMPO-CLEAN.

RECOMMENDATIONS BEFORE Application

  • Do not apply in direct sunlight or to hot surfaces.
  • Do not apply if cold or wet weather is expected within 24 hours.
  • Protect everything that does not have to be coated.

Application

  • Do not dilute. Stir well before application.
  • Apply a coat of COMPO-CARE to the entire length of the deckboard, cladding or piece of wood stopping at any natural breaks to avoid lapping.
  • After spray application, always back-brush or back-roll to improve penetration and uniformity of coverage.
  • Decks subject to heavy traffic should be left up to 24 hours before being put back in to full service.

Color available

 

 

 

Related Products

CHOUKROUT_pack

CHOUKROUT CN

玻璃纤维聚酯填料
compoclean_pack-GB-DE

COMPO-CLEAN CN

更清洁的复合木材除油剂
scs_pack-GB-GR

SOLID COLOR STAIN CN

适用于户外水平或垂直木材的防透光木材整理剂