pack-COMPO-CARE no

COMPO-CARE no

Fargefornyer for kompositt-tre
picto_rendement Coverage: 15 m²/l
picto_temperature Application temperature: +5°C à +35°C
picto_temps Drying: 12 to 24 h

picto_eau-Gb  

PROPERTIES

Transparent tinted coating.
Enhances the colour of composite woods.
Protects against stains (oils, grease...).
Waterproofs the surface.
Quick drying - Low odour.

WHERE TO USE

  • All exterior composite woods 
  • Direct on prepared woods
  • Vertical and horizontal surfaces: decks, cladding, garden furniture...

SURFACE PREPARATION

  • The surface must be clean, dry and free of dirt, mildew, grease...
  • Clean surface with COMPO-CLEAN.

RECOMMENDATIONS BEFORE Application

  • Do not apply in direct sunlight or to hot surfaces.
  • Do not apply if cold or wet weather is expected within 24 hours.
  • Protect everything that does not have to be coated.

Application

  • Do not dilute. Stir well before application.
  • Apply a coat of COMPO-CARE to the entire length of the deckboard, cladding or piece of wood stopping at any natural breaks to avoid lapping.
  • After spray application, always back-brush or back-roll to improve penetration and uniformity of coverage.
  • Decks subject to heavy traffic should be left up to 24 hours before being put back in to full service.

Color available

 

 

 

Related Products

pack-COMPO-CLEAN no

COMPO-CLEAN no

Rensemiddel/vasker for kompositt treverk
pack-net-trol-SK

MAST RESTORER no

Trerens & Fargefornyer
pack-polytrol-SK

POLYTROL no

Fargefornyer - Plastikk, Maling, GRP, Metall