scs_pack-GB-GR

SOLID COLOR STAIN

Opaque wood finish for outdoor woods horizontal and vertical
picto_rendement Coverage: 8 to 10 m²/l
picto_temperature Application temperature: +10°C to +30°C
picto_temps Recoating time: 3 to 4 h - Setting up time before use: 24 to 48 h

picto_eau-Gb

PROPERTIES

Opaque matte finish all wood.

WHERE TO USE

  • Direct on prepared woods
  • Exterior: cabins, decks, cladding, fences, shutters, outdoor furniture.
  • Softwood, Hardwood, Tropical and Thermo Heated Wood.
  • New or old wood
  • Previously painted or stained wood surfaces.

SURFACE PREPARATION

New Wood :

  • New wood often has a hard shiny surface known as mill glaze, this and the moisture content of new wood prevents the proper adhesion of any coating. Initially, apply a coat of SEASONITE, and allow wood to weather a minimum 6 months. After 6 months apply SOLID COLOR STAIN.

Weathered Wood - grey, blackened or stained :

  • Restore and clean the wood with NET-TROL.
  • If necessary sand the wood (100 grit)

Previously coated wood :

  • Strip with DILUNETT and neutralise with NET-TROL.
  • On Oak and Chestnut, manualy or mechanicaly sand the wood, dust off and wash with NET-TROL to clean. Allow to dry.

RECOMMENDATIONS BEFORE Application

  • Purchase sufficient product for the whole job and mix all product together before starting, to avoid colour variances.
  • Stir or shake can well.
  • Wood surface must be clean, dry (3 days of dry weather) and free of dirt, mildew and other contaminants before applying the SOLID COLOR STAIN.
  • Do not dilute.
  • Before starting application, test the colour choice on a small area and allow to dry to determine final colour.

Application

  • Apply a coat of SOLID COLOR STAIN.
  • Allow to dry 3-4 hours.
  • Apply a second coat.
  • When applying by spray, always back-brush or back-roll immediately after application to ensure uniformity of colour, coverage and penetration.

Maintenance

  • Surfaces with harsh exposure to weather or traffic will wear more quickly than other areas. In these cases, clean the damaged areas and apply the product in accordance with the directions.
  • Clean coated surfaces especially decks as part of a normal maintenance plan. Observing an precautions.
  • Warranty 5 years on horizontal surfaces. 15 years on vertical surfaces.

Color available

 

 

 

Related Products

pack-DILUNETT-1L-GB-DE

DILUNETT

Solvent free paint remover for all surfaces
net-trol_pack-GB-DE

NET-TROL

Wood cleaner & Colour restorer
seasonite_pack-GB

SEASONITE

Protection for all new exterior softwoods