alu-galva-pack FR

OWATROL AGP

Decorative satin paint
picto_rendement Coverage: 8 to 10 m2/l
picto_temperature Application Temperature: 10°C to 25°C
picto_temps Touch Dry: 1Hr 30min / Recoat: 6hrs

picto_eau-Gb

PROPERTIES

Satin finish intended for the protection of very smooth surfaces and hard plastics. Its special formula adheres directly to these surfaces without the need for a primer or the risk of chipping.
Applies easily to pre-painted claddding, hard plastic, PVC and smooth ferous and non ferous metals - Aluminium, Galvanised, Zinc.
White may be tinted with a good quality colourant to give a pastel shade. Maximum of 3% colourant. 

WHERE TO USE

  • Exterior: Woodwork, Garage doors, Gutters etc.

RECOMMENDATIONS BEFORE Application

  • Stir well before use. Do not dilute.
  • Application Temperature: 10°C to 25°C without humidity.
  • Do not apply in direct sunlight, to hot surfaces or if cold or wet weather is expected.
  • Do not apply to soft plastics - nylon, polyethylene and polyproylene.
  • Do not apply to garden furniture (table and chairs)

Application

  • Apply to a clean, dry and degreased surface that has been sanded.
  • Apply 1 or 2 coats by brush, short pile roller or spray.
  • Apply thin coats to ensure proper adhesion and to avoid runs and sags.
  • Fast drying
    - Touch dry: 1hr 30 min
    - Recoat: 6 hrs
    - Hard dry: 3 days
  • Clean tools with water immediately after use.

Recommendations after Application

  • Return unused product to original container. Seal lid tightly.
  • Store in a cool dry place away from frost.


picto_phrase_obligatoires The instructions given here are for guidance only. Please refer to the Technical Data sheet for full application instructions.

Related Products

polytrol_pack-GB-GR

POLYTROL

Colour restorer - Plastic, Paint, GRP, Metal
ro_pack-GB-DE

OWATROL OIL

Colourless, penetrating and isolating rust inhibitor
COSMOFER_pack

COSMOFER

Cold welding universal polyester cement