compoclean_pack-GB-DE

COMPO-CLEAN

Cleaner degreaser for composite woods
picto_rendement Coverage: 5 to 10 m²/l
picto_temperature Application temperature: +5°C to +35°C
picto_temps Working time: 5 mn

picto_eau-Gb  

PROPERTIES

Waterbased - Environmentally friendly.
Removes surface and ground in dirt.
Fast acting - from 5 minutes depending on the condition of the surface being cleaned.
Gel formula - Does not run. Easy to apply.
Does not contain solvents or paraffin. Will not attack plastic pool liners, stone, glass...

WHERE TO USE

  • Exterior use.
  • All types of composite wood.
  • Vertical and horizontal surfaces.
  • Ideal for grooved decking.

RECOMMENDATIONS BEFORE Application

  • Always test a small area first.
  • Protect all areas not to be cleaned, plants, shrubs etc including and especially aluminum parts.
  • Wear suitable protection - gloves (rubber/nitrile), goggles or visor, clothing.

Application

  • Apply a thick layer of COMPO-CLEAN to the area to be cleaned. Large areas, should be cleaned in smaller sections.
  • Leave the product to work for 5 minutes (longer if necessary depending on the nature of the dirt and contamination).
  • Scrub with a stiff nylon or synthetic brush.
  • Rinse with plenty of fresh clean water using the highest pressure source available or use a power washer (max 50 bars). If required repeat above procedure - difficult/stubborn staining. Allow surface to dry 2/3 good drying days before applying chosen finish.

 

 

 

Related Products

compocare_pack-GB-DE

COMPO-CARE

Composite wood reviver
net-trol_pack-GB-DE

NET-TROL

Wood cleaner & Colour restorer
scs_pack-GB-GR

SOLID COLOR STAIN

Opaque wood finish for outdoor woods horizontal and vertical